Skip to content
Sections
>> Trisquel >> Paketit >> aramo >> comm >> bladerf-fpga-hostedx40
etiona  ] [  nabia  ] [  aramo  ]
[ Source: bladerf  ]

Paketti: bladerf-fpga-hostedx40 (0.2021.10-2)

Nuand bladeRF FPGA bitstream downloader (hostedx40)

This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.

This bitstream is for the bladeRF x40 with the Altera Cyclone IV EP4CE40 FPGA.

Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility.

Muut pakettiin bladerf-fpga-hostedx40 liittyvät paketit

  • depends
  • recommends
  • suggests
  • rec: bladerf
    Nuand bladeRF software-defined radio device (tools)

Imuroi bladerf-fpga-hostedx40

Imurointi kaikille saataville arkkitehtuureille
Arkkitehtuuri Paketin koko Koko asennettuna Tiedostot
all 5.2 kt29 kt [tiedostoluettelo]