Skip to content
Sections
>> Trisquel >> Paketit >> nabia >> utils >> ddcutil
etiona  ] [  nabia  ] [  aramo  ]
[ Source: ddcutil  ]

Paketti: ddcutil (0.9.8-2)

Control monitor settings

ddcutil is used to query and change monitor settings.

ddcutil communicates with monitors implementing MCCS (Monitor Control Command Set). Normally, communication is performed using the DDC/CI protocol on the I2C bus. Alternatively, communication can be performed over USB as per the USB Monitor Control Class Specification.

A particular use case for ddcutil is as part of color profile management. Monitor calibration is relative to the monitor color settings currently in effect, e.g. red gain. ddcutil allows color related settings to be saved at the time a monitor is calibrated, and then restored when the calibration is applied.

Muut pakettiin ddcutil liittyvät paketit

  • depends
  • recommends
  • suggests
  • dep: hwdata
    hardware identification / configuration data
  • dep: i2c-tools
    heterogeneous set of I2C tools for Linux
  • dep: libc6 (>= 2.17)
    GNU C Library: Shared libraries
    myös näennäispaketti, jonka toteuttaa libc6-udeb
  • dep: libdrm2 (>= 2.4.66)
    Userspace interface to kernel DRM services -- runtime
  • dep: libglib2.0-0 (>= 2.39.4)
    GLib library of C routines
  • dep: libudev1 (>= 183)
    libudev shared library
  • dep: libusb-1.0-0 (>= 2:1.0.22)
    userspace USB programming library
  • dep: libx11-6
    X11 client-side library
  • dep: libxrandr2 (>= 2:1.2.99.2)
    X11 RandR extension library

Imuroi ddcutil

Imurointi kaikille saataville arkkitehtuureille
Arkkitehtuuri Paketin koko Koko asennettuna Tiedostot
amd64 211.3 kt626 kt [tiedostoluettelo]
armhf 188.7 kt439 kt [tiedostoluettelo]