Skip to content
Sections
>> Trisquel >> 套件 >> etiona >> comm >> usb-modeswitch-data
etiona  ] [  nabia  ] [  aramo  ]
[ 原始碼: usb-modeswitch-data  ]

套件: usb-modeswitch-data (20170806-2)

mode switching data for usb-modeswitch

Several new USB devices have their proprietary Windows drivers onboard, especially WAN dongles. When plugged in for the first time, they act like a flash storage and start installing the driver from there. If the driver is already installed, the storage device vanishes and a new device, such as an USB modem, shows up. This is called the "ZeroCD" feature.

On Debian, this is not needed, since the driver is included as a Linux kernel module, such as "usbserial". However, the device still shows up as "usb-storage" by default. usb-modeswitch solves that issue by sending the command which actually performs the switching of the device from "usb-storage" to "usbserial".

This package contains the commands data needed for usb-modeswitch.

其他與 usb-modeswitch-data 有關的套件

  • 依賴
  • 推薦
  • 建議
  • rec: udev
    /dev/ and hotplug management daemon
  • rec: usb-modeswitch (>= 2.4.0)
    mode switching tool for controlling "flip flop" USB devices

下載 usb-modeswitch-data

下載可用於所有硬體架構的
硬體架構 套件大小 安裝後大小 檔案
all 30.0 kB94 kB [文件列表]